- Products description
Products description
Product description
- Precisely manufactured
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Rolled trapezoid spindles
- Leadscrew stored in two sintered bearings
- Two tapered roller bearings in P5 quality
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.01 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Concentricity - chuck better than 0.05 mm
- Lead screw for thread cutting or automatic longitudinal turning
- Right / left rotation in the control panel switchable
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Emergency stop impact switch
- thrust bearing
- Extensive accessories
- 3-jaw lathe chuck in the standard scope of delivery
- Stable value
TU 2406V
- Speed change easily adjustable via potentiometer
- Digital speed display
- EMC filter class C1
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Scope of delivery
- Three-jaw lathe chuck Ø 125 mm,
self-centring - Fixed centering point MK 2 and MK 3
- bulkhead
- chip pan
- Quadruple tool holder
- Change gear set
- operating tool
Technical data
| Dimensions and weights | |
|---|---|
| Length (product) approx. | 1250 mm |
| Width/depth (product) approx. | 594 mm |
| Height (product) approx. | 484 mm |
| Net weight approx. | 125 kg |
| Work areas | |
| Center height | 125 mm |
| Distance between center | 550 mm |
| Swing diameter above machine bed | 250 mm |
| Swing diameter above planing slide | 148 mm |
| Bed width | 133 mm |
| Speed range | |
| Speed control | electronically adjustable |
| Number of gears | 2 |
| Speed range | 150 – 2500 min¯¹ |
| Electrical Data | |
| Drive motor output | 1,1 kW |
| Supply voltage | 230 V |
| Mains frequency | 50 Hz |
| Standards and certifications | |
| Standard | DIN EN 55011 |
| EMC level | C1 |
| Spindle | |
| Spindle chuck | cylindrical Ø 52 mm |
| Spindle bore | 21 mm |
| Tool holder max. chuck height | 12 mm |
| Spindle cone | MK 3 |
| Tailstock | |
| Tailstock chuck | MK 2 |
| Tailstock quill stroke | 60 mm |
| Pitches | |
| Metric pitch | 0,4 – 3,5 mm/rev |
| Number of metric pitches | 14 |
| Imperial pitch | 44 – 10 Gg/1" |
| Number of imperial pitches | 12 |
| Travel | |
| Travel upper slide | 75 mm |
| Travel cross slide | 120 mm |
| Travel carriage saddle | 550 mm |
This Product was added to our catalogue on 05/11/2026.
Last viewed:




