Product no.: 2044050
Product description
- Flow-optimized air supply for up to 75% less resistance
- Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
- Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
- CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
- 100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
- With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
- Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
- for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
- Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
- absolute compressed air quality according to ISO 8573-1
- For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
- Pure compressed air in connection with upstream ultrafine filter
- With filter element and manual drain
Manufacturer
BEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
Scope of delivery
Filter element, float valveTechnical data
| Volume flow m³/h | 200 test |
|---|
| Volume flow l/min | 3340 l/min |
|---|
| Volume flow measured at operating pressure | 7 bar |
|---|
| Air connection | 1 " |
|---|
| Dimensions and weights |
|---|
| Width/depth (product) approx. | 100 mm |
|---|
| Height (product) approx. | 350 mm |
|---|
| Technical data |
|---|
| Operation | Safe segregation of condensate, oil aersol, and particles |
|---|
| Range of Application | For tough requirements, e.g. for use in front of membrane and adsorption dryers |
|---|
| Particle size | 0,01 µm |
|---|
| Residual oil aerosol content | 0.005 mg/m³ |
|---|
| Comment on residual content | at 20°C and 1 bar |
|---|
| Differential pressure (dry) | 0.06 bar |
|---|
| Purity class of compressed air in accordance with ISO 8573-1 | 1. – .2 |
|---|
| Comment on purity class | Since coalescing filters cannot retain any oil vapours, an activated carbon adsorber is required to attain class 1.-.1. |
|---|
Price:
629,51 EUR