Product no.: 2023085
Product description
- Two-stage compression 2-cylinder high-performance unit with cast iron cylinder block
- The low speed ensures quiet, low-vibration operation and a long service life
- Large fan wheel for optimal cooling
- High quality electric motor with high torque
- Electric motor equipped with motor protection switch
- With phase inverter for easy manual reversal of the direction of rotation
- Intermediate and aftercooler reduces the formation of condensation
- Maintenance block with two pressure gauges for tank pressure and working pressure and high quality CONDOR pressure switch
- Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
- Fully automatic on-off operation
- Ready for connection with all fittings
Increased flexibility
- By connecting the second compressed air tank, the container volume is doubled, whereby a higher air supply can be established
- An increased demand for air can thus be covered in the short term.
- The second compressed air tank can be disconnected from the compressed air supply e.g. for chiselling or sandblasting. This halves the container volume and pressure builds up faster.
Equipment details:
- K version with refrigeration dryer with integrated automatic steam trap as standard
- Pressure dew point 5 °C, compressed air inlet temperature 35 °C, cooling air temperature 25 °C
- K version additionally with pre-filter for separating condensate and solid impurities with particles up to 1 μm
- Compressed air quality according to ISO 8573-1
- As a pre-filter in front of the refrigeration dryer
- KK version with automatic steam trap on the compressed air tank
- This condensate drainage without unnecessary pressure loss
- Condensate conditioner for oil-water separation
Manufacturer
Aircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
Technical data
| Air outlet | 3/4 " |
|---|
| Dimensions and weights |
|---|
| Length (product) approx. | 1200 mm |
|---|
| Width/depth (product) approx. | 900 mm |
|---|
| Height (product) approx. | 1140 mm |
|---|
| Net weight approx. | 235 kg |
|---|
| Equipment |
|---|
| Automatic pressure switch | CONDOR |
|---|
| Drive transmission | V-belt |
|---|
| Material compressed air line | Flexible armored conduit with heat protection |
|---|
| Condensate drain | 3/8" ball valve on each tank |
|---|
| Compressed air outlet | Ball valve |
|---|
| Pressure vessel | Hot-dip galvanized inside and out with fifteen-year warranty against rust-through |
|---|
| ZÜS tested | Testing before commissioning can also be carried out by a qualified person |
|---|
| Compressor base | Swing elements. safety stand pallet |
|---|
| Electrical Data |
|---|
| Supply voltage | 400 V |
|---|
| Mains frequency | 50 Hz |
|---|
| Motor power (input power) | 6,5 kW |
|---|
| Motor power | 5,5 kW |
|---|
| Noise emission |
|---|
| Whisper quiet | No |
|---|
| Sound pressure level Lp | 83 dB(A) |
|---|
| Explanation sound pressure level Lp | Sound pressure level at a distance of 1 m according to DIN 45635 T 13 |
|---|
| Compressor |
|---|
| Compressor system | HOS |
|---|
| Suction capacity approx. | 850 l/min |
|---|
| Filling capacity approx. | 680 l/min |
|---|
| Explanation filling capacity | at 6 bar working pressure |
|---|
| Number of cylinders | 2 |
|---|
| Number of compressor stages | 2 |
|---|
| Compressor speed | 1240 min¯¹ |
|---|
| Compressed air tank |
|---|
| Maximum pressure | 10 bar |
|---|
| Pressure vessel capacity | 200 l |
|---|
| Explanation Pressure vessel capacity | 2 x 100 l |
|---|
| Tank surface | Galvanised |
|---|
Price:
3.533,11 EUR